up table fume hood with acid and akali resistance in chemical laboratory

 up table  fume hood with acid and akali resistance in chemical laboratorysteel fume hood

Of the goods

model

parameter

note

1.2 m all steel fume hood

s0120

2350 * 1200 * 850 mm

Mesa, remote control valves, water cup

1.5 m all steel fume hood

PFH0150

2350 * 1500 * 850 mm

Mesa, remote control valves, water cup

1.8 m all steel fume hood

PFH0180

2350 * 1800 * 850 mm

Mesa, remote control valves, water cup

 

1, material:

1.1 shell material: which adopt new 1.0 mm thick cold rolled steel sheet (baosteel), the anodic film processing, acid and alkali resistant paint coated with EPOXY burn; In line with the steel plate coating film thickness, coating adhesion test.

Within 1.2 materials (such as side panel, the back, the roof, guide plate), with 6 mm thick resistance times the special plate.

1.3 guide plate fixed bridge: the PC material a integrated, activity combination, convenient disassembly, and has a fixed frame function synthesis.

1.4 set the wind hood, using pp wind hood, coated with EPOXY burn appearance by the acid and alkali resistant paint.

1.5 type auxiliary and air holes: the 10 mm thick cold rolled steel sheet after hydraulic integrated forming, the EPOXY coating processing.

2, adjust the door system:

Sliding door: 2.1 activity around a single operation,

Sliding door glass: 2.2 use 5 mm thick toughened safety glass.

2.4 glass handle: adopt stainless steel

3, power supply unit:

3.1 operating panel: the film microcomputer electronic touch control panel, labeled power. Motor, standby (switch) and LED running lights (select configuration required).

3.2 protection device: power supply, motor phase, overload, owe, reverse fault protection (select configuration required).

3.3 lighting: the philips 30 w fluorescent lamp source.

3.4 socket: Shanghai laboratory use special splash cover multi-function socket, apply a variety of experimental instrument plug needs.

4, drainage device:

4.1 test glass tank: adopt special laboratory PP unibody, thickness 5 mm, flexible, and acid and alkali resistance, heat resistance and organic solvent. Size: H147mm W115 L260 * *.

4.2 collector: the PP injection molding, prevent siphon type collector.

5, water supply device:

5.1 water corker: using the copper stand-up corker of water supply.

5.2 water supply control valve: refined copper casting, bronze coated with resistance to acid and alkali burn on the surface, in case of acid and alkali and rust, precision ceramic valve core. * water pressure resistance of 17.5 KGF/cm2 (PSL) 247, a minute without leakage.

6, gas supply device:

6.1 gas corker: copper mining stand-up gas corker. (select configuration required)

6.2 gas control valves, copper coated with resistance to acid and alkali burn on the surface, in case of acid and alkali and rust. The play button switch adopts safety valve, strengthen the safety of using prevent inadvertent mistake dangerous touch switch (select configuration required).

6.3 adjust a foot: laboratory special nylon adjusting foot (free to adjust height > 30 ㎜, screw diameter > 10 ㎜).

7, main technical performance indicators:

7.1 back space of harmful gas in different height to control the concentration of less than 0.5 ml/m performance indicators from different section area respectively. This series of detoxification ark with operating surface wind

 

The speed of the speed of 0.3 0.5 m/s will discharge air ventilation cabinet to ensure no any residual gas exists. Ventilation efficiency is high, the air volume is 1000-1600 m3 / h, and low noise (65) or less noise. For students to provide a safe, comfortable space experiment.

7.2 water, electricity, ventilation control, fire, explosion, corrosion resistance, light the magnitude of working face 450 lux standard or higher, multi-function socket (three phase, single phase). Vacuum suction, inert gas pipes and compressed air pipes on multiple interfaces. Can meet the requirements of a variety of laboratory water, electricity, gas. All operations at the same time just on the front panel